Free shipping on all orders
PIR-sensor urinal flush control for cistern-fed urinals: opens a brass solenoid valve only when the washroom is used, cutting water use by over 80 %. Battery and/or 230 V mains, 1/2″ BSP, WRAS-approved solenoid.
€260.99
In stock
Order today and receive it on October 27 - November 2 in Spain, or on November 2-4 in the EU and the United Kingdom.
Secure payment with Visa, Mastercard and American Express. Prices include VAT.
Spain 2–7 business days, rest of the European Union and the United Kingdom 6–8. Orders confirmed on a business day before 14:00 are prepared the same day. See Shipping and Payment Methods.
Free when the product is faulty, arrives damaged or does not match the order. If you simply change your mind, the return costs £34.90 from the United Kingdom and €24.90 from Ireland and the rest of the European Union, and is free within Spain; the product must not have been installed or used. See Returns, Exchanges and Warranty.
Every product is new and sealed. 3-year legal guarantee; the manufacturer’s commercial warranty applies in addition where it exists. Customer support in Spanish and English, Monday to Friday.
The Cistermiser IRC2 controls the water supply to a urinal cistern with a motion-sensing infrared sensor. When movement is detected, the latching brass-bodied solenoid valve opens and the cistern fills and flushes; when the room is empty no water is used, apart from an automatic 30-minute hygiene opening after 12 hours without use. A Normal mode limits flushing to twice an hour and an Economy mode adds a 15-minute delay. The sensor (85 × 85 × 68 mm) covers 125° and about 9.2 m at floor level.
The valve is fitted on the 1/2″ (15 mm) supply pipe to the cistern and works from 0.1 to 6 bar; above 6 bar a pressure-reducing valve is required. It runs on four AA alkaline batteries (around 3 years) and/or 230 V mains via the integral transformer, with batteries usable as back-up. The sensor can be mounted on the valve, on a wall, or recessed into a ceiling with the bracket supplied. It is intended for commercial washrooms and helps meet the UK Water Regulations for urinal controls.
The figures on this page are taken from the manufacturer’s own documentation and product data; if anything differs, the manufacturer’s documentation prevails. The manufacturer gives a 1-year parts guarantee from date of manufacture (3 years when registered after commissioning), which applies in addition to your statutory consumer rights.
| Brand | Cistermiser |
|---|---|
| Model | Infrared Control Valve IRC |
| MPN / Manufacturer code | IRC2 |
| EAN / GTIN | 5014308061132 |
| Finish / Colour | White ABS sensor housing |
| Product type | Infrared urinal control valve |
| Application | Urinal / WC flushing |
| Operation | Infrared sensor |
| Valve state | Normally closed |
| Body material | Brass (solenoid valve body) |
| Max water pressure | 6 bar |
| Min water pressure | 0.1 bar |
| Detection range | 9.2 m |
| Connection size | 1/2" BSP (15 mm) |
| Connection type | Compression |
| Power source | Mains with battery back-up |
| Voltage | 230 V |
| Battery type | 4 × AA alkaline (LR6) |
| Width | 85 mm |
| Height | 85 mm |
| Depth | 68 mm |
| Installation type | Inline on pipework |
| Mounting notes | Sensor on valve, surface on wall/ceiling, or recessed in suspended ceiling (bracket and template supplied) |
| Included in box | PIR sensor unit, 6 V latching solenoid valve, flush-mounting bracket, floating socket, fittings |
| Approvals | WRAS (solenoid valve) |
| Guarantee | 1 year (3 years on registration) |
